Web User Manager Usage Instructions

If needed, download, install and configure DAFTools ASP component and Web User Manager application. Instructions are available on installation page.

Web User Manager can be used according to two modes:

• Main Administrator Mode: This mode gives access to any DAF database.
• Database Administrator Mode: This mode gives access to only ONE predefined DAF database. With this option the NT server administrator can safely delegate the administration of each DAF database to a different person.

The execution mode cannot be set at run time, but only by editing the DAFCOMMON.INC configuration file. For more information, check the installation page.

With Main Administrator Mode:

1. Run the Web User Manager

With an HTML browser load file "http://www.yourdomain.com/mainuserman"
The following page should be displayed:

2. Log in

• Choose link "Admin Log In"
• Enter a valid login and password
• Press Login

Login information is an ASP session property. In other words, it will stay active as long as the ASP session is alive.

3. Select a DAF database to manage

To select a DAF database to manage, you need to select the attached IP address.

• Choose link "Select IP"
• The following page listing all installed DAF databases should be displayed:

• In the left table, select a DAF database
• In the right table, select an IP address from the selected DAF database
• The select database and mapped IP address should then be displayed at the top of the Contents frame.

4. Manage Users

To manage Web users, use choice "Find User," "Add User," "Modify User" and "Remove User."

The following error is displayed when the Administrator is not logged:

-------------------------------------------

Microsoft VBScript runtime error '800a0046' 
Permission denied 
/usermanager/adduser.asp, line 74

-------------------------------------------

5. Log off

Choose link "Admin Log Off"

With Database Administrator Mode:

1. Run the Web User Manager

With an HTML browser load file "http://www.yourdomain.com/dbuserman"
The following page should be displayed:

2. Log in

• Choose link "Log Off"
• Enter a valid password
• Press Login

Login information is an ASP session property. In other words, it will stay active as long as the ASP session is alive.

3. Manage Users

To manage Web users, use choice "Find User," "Add User," "Modify User" and "Remove User."

The following error is displayed when the Administrator is not logged:

-------------------------------------------

Microsoft VBScript runtime error '800a0046' 
Permission denied 
/usermanager/adduser.asp, line 74

-------------------------------------------

4. Log off

Choose link "Log Off"

Last update: Friday, April 02, 1999 08:16